| Glass
etchers have always been plagued by fingerprints
on their etched and carved glass. They look terrible and are difficult
to clean off. Many commercial customers are beginning to demand
that you have a way of preventing them before giving you an etching
job.
The only way to prevent
fingerprints in the past was to pay thousands of dollars to buy
an expensive franchise, or to install clear glass up against the
etching in a double layer. Neither of these very desirable. We used
to recommend a stopgap product that was a temporary silocone based
product that had to be reapplied over and over, and never worked
very well.
But now there
is a better way! We are introducing a revolutionary new
product that will do the job for you with a simple application of
a liquid protective coating. You simply wipe it on, wipe it off,
then let it cure for an hour!
Of course, this works
on extremely clean glass that the product can easily bond to. For
glass that is not completely clean, we have put together a kit for
you that comes in 4 parts.
- Part
1: an excellent glass cleaner
- Part
2: a 'glass renovator' stain remover for most watermarks and difficult
deposits
- Part
3: the liquid coating itself
- Part
4: the post-cure cleaner for excess coating material
This is not a temporary
coating - it's permanent! Use this product and add value to your
etching. Using this coating is more like an investment than a cost.
Those who have had access to franchised coatings have been able
to raise the price of their coated etchings by at least 4 times
the cost of the coating material. Don't miss out on this great new
product. |
This
introductory kit contains enough material to treat 10 square feet
of glass to get you started. Then you can purchase a larger kit,
suitable to treat 100 square feet of glass, or you can purchase
each of the 4 components individually, and replenish them as needed.
FAQ's
Will this
coating make my etching 'disappear', like spraying on clear lacquer
would?
No, after this coating is properly
applied and cleaned it is hardly noticeable on the glass. Your etching
looks as good as ever!
Does this
coating prevent fingerprints? What about fingerprints from kids
in a pizza parlor?!
It
won't completely prevent fingerprints, but contaminants from natural
finger oils to pizza grease just sit on top of the coating. They
aren't absorbed into the etching. These contaminants are a breeze
to clean off if - but only if you treat the glass first!
How
hard is it to use this coating, and how do I learn?
It's
easy! All orders include full instructions as well as MSDS sheets.
|
/ 
